NAD – C 338

nad-c338
CIJENA:
5.299,00kn

NAD’S MOST VERSATILE AMPLIFIER EVER WITH CHROMECAST BUILT-IN AND HYBRID DIGITAL TECHNOLOGY

Introducing the NAD C338

Getting the Basics Right

Built with NAD’s renowned music-first approach to audio architecture and amp design, the C 338 is equipped with the most advanced components commonly found in NAD’s class-leading line of amplifiers. Always starting with the details you can hear and advancing from there, NAD develops low-noise circuitry with the precision and stability to deliver incredible, near-zero distortion sound for the most difficult speakers.

Hybrid Digital™ Amp Technology

The search for a high-performance Class D solution led NAD to Hybrid Digital™, an innovative amplifier technology that uses a variable modulation frequency to bring out the life-like qualities of music, while reducing distortion under every operating condition. This highly optimized design gives phenomenal performance to the C 338 amplifier, both measured and subjective.

Efficient Class D Power

NAD has worked tirelessly to create the best performing Class D amplifiers that are energy efficient and produce beautiful sound—not heat—regardless of basic design principles. Using advanced measurements and data, NAD developed the C 338’s highly efficient power supply with a customised Hypex® UCD output stage to pump out 160 watts continuously and over 300 watts instantaneously to meet the demands of the most dynamic music. This new design is very linear over a wide bandwidth and provides consistent, noise-free performance for the amplifying stages with near perfect regulation of voltage.

Always Ready for Streaming

The C 338 has Chromecast built-in so you can cast music, tunes, podcasts, and playlists from your favourite apps on your phone, tablet or laptop to your stereo system. Plus, with Bluetooth® integrated and its added flexibility, your music streaming possibilities are truly limitless with the C 338.

Built-in Phono Stage for Vinyl Listening

Connect a turntable to the C 338 with its built-in phono preamp that applies the perfect amplification to your vinyl collection. Using a MM phono stage and an innovative low-noise circuit path, the C 338 can reproduce the warmth of LPs with accurate RIAA equalization and control the infrasonic noise that is in all recordings, without ever affecting the bass response.

Flexible Connectivity

With a wide array of connections, including a separate headphone amplifier that can drive high-impedance studio monitor headphones, the C 338 is ready for any type of listening. Line inputs can accommodate all kinds of analogue source components, offering ideal input impedance with linear ultra-low noise buffer amplifiers to preserve the musicality of recordings. Also connect a subwoofer with low impedance line outputs and extend the versatility of this budget-friendly, do-it-all amplifier.

PREAMPLIFIER

Line In, Subwoofer Out

THD (20Hz – 20kHz): <0.005% at 2V out

Signal/Noise Ratio: >106dB (IHF; A-weighted, 500mV out, unity gain)

Input Impedance (R and C): 56 kilohm + 100pF

Maximum input signal: >4.5Vrms (ref. 0.1% THD)

Output impedance: Source Z + 200 ohm

Input sensitivity: 50mV (100Hz ref. 500mV out, Volume maximum)

Maximum voltage output -IHF load: >4.5V (ref. 0.1% THD)

Line In, Headphone Out

THD (20Hz – 20kHz): <0.005% at 1V out

Signal/Noise Ratio: >105dB (IHF; A-weighted, 32 ohm loads, ref. 2V out, unity gain)

Frequency response: ±0.3dB (20Hz – 20kHz)

Channel separation: >56dB at 1kHz

Output impedance: 0.5 ohm

GENERAL SPECIFICATIONS

Line In, Speaker Out

Continuous Output Power into 4 ohms and 8 ohms (Stereo): >50W (at rated THD, 20-20kHz, both channels driven)

IHF Dynamic Power: 2 ohm 210W; 4 ohm 150W; 8 ohm 80W

THD (20Hz – 20kHz): <0.03% (250mW to 50W, 8 ohm and 4 ohm)

Signal/Noise Ratio: >98dB (A-weighted, 500mV input, ref. 1W out in 8 ohm)

Clipping power: >60W (at 1kHz 0.1% THD)

Peak output current: >18A (in 1 ohm, 1ms)

Damping factor: >300 (ref. 8 ohm, 20Hz to 6.5kHz)

Frequency response: ±0.3dB (20Hz-20kHz)

Channel separation: 1kHz >75dB; 10kHz >65dB

Input sensitivity (for 50W in 8 ohm): Line In: 380mV; Digital In: 18% FS

Support bit reate/sample rate: Up to 24bit/192kHz

Standby Power: <0.5W

Phono In, Speaker Out

THD (20Hz – 20kHz): <0.03% at 50W out

Signal/Noise Ratio: >82dB (200 ohm source, A-weighted, ref. 500mV out); >76dB (MM cartridge source, IHF A-weighted, ref. 500mV out)

Input sensitivity: 4.1mV (ref 50W 1kHz 4 ohm out, volume maximum)

Frequency response: ±0.3dB (20Hz – 20kHz)

Input impedance (R and C): 47 kilohm + 100pF

Maximum input signal at 1kHz: >80mVrms (ref. 0.1% THD)

DIMENSIONS AND WEIGHT

Dimensions (W x H x D): 435 x 70 x 285mm

Net Weight: 4.85kg (10.7lb)

Shipping Weight: 5.85kg (12.9lb)

 

U pripremi...