NAD – C 326BEE

nad c326bee
CIJENA:
3.999,00kn

The NAD C 320 series of amplifiers have always punched far above their modest weight. Combining the highest levels of audio engineering with an extensive feature list, and more than adequate power for all but the most ambitious systems, the C 326BEE keeps the concept of affordable hi-end alive and well. With the very high dynamic power and low impedance drive capability of NAD’s proprietary PowerDrive™ circuit, the C 326BEE is able to accurately control even difficult to drive loudspeakers while sounding musical, detailed, coherent and relaxed.

The C 326BEE is the latest in NAD’s range of affordably priced, yet very high performance Stereo Integrated Amplifiers. Neatly slotted in between our most affordable C 315BEE and more powerful C 355BEE, the C 326BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier. These include application of Bjørn Erik Edvardsen’s innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. An improved tone control circuit and revised PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that must be heard to be fully appreciated!

2 x 50W Continuous Power into 4 ohms and 8 ohms

100W, 150W, 200W IHF Dynamic power into 8, 4 and 2 ohms, respectively

PowerDrive™ circuit

NAD SR 8 Full System Remote control

Headphone socket

Front panel Media Player (MP) input for attaching portable MP3 Player

Relay Input Switching

Holmgren Toroidal Power transformer

7 Line inputs, including one tape in/out

All discrete circuitry Short signal path from input to output

All sockets Gold plated

Tone controls defeat switch

Main-amp input & pre-amp outputs

Subwoofer (mono) Out

Soft Clipping™

IR Input/Output

12 volt trigger out

Detachable IEC Power Cable

<1W Standby Power Consumption

Free of lead and other environmentally dangerous substances

SPECIFICATIONS

PREAMPLIFIER SECTION

Line level input, Pre OUT:

THD (2V in 2V out, CCIF IMD, DIM 100):……………………………. >0.004% (ref. 20Hz – 20kHz)

Signal/Noise ratio IHF:…………………………………………………….>100dB (A-weighted, ref. 500mV), >108dB (A-weighted, ref. 2V, Volume maximum),>92dB (A-weighted, ref. 100mV in 100mV out – unity gain)

Channel separation 1kHz:………………………………………………….>80dB

Channel separation 10kHz:…………………………………………………>70dB

Input impedance (R and C):……………………………………………….. 100kΩ+ 320pF

Maximum input signal:……………………………………………………… >8V rms (ref. 0.1 THD)

Output impedance:…………………………………………………………… Pre out: 75Ω, Tape out:  Source Z + 1kHz

Input sensitivity:……………………………………………………………… 159mV (ref. 500mV out)

Frequency response:…………………………………………………………± 0.1dB (ref. 20Hz – 20kHz, Tone defeat ON), ± 0.5dB (ref. 20Hz – 20kHz, Tone defeat OFF)

Maximum voltage output

IHF load:…………………………………………………………………………. >10V (ref. 0.03% THD)

600 ohms load:………………………………………………………………… >10V (ref. 0.03% THD)

Tone controls

Treble:……………………………………………………………………………..± 5dB at 10kHz
Bass:……………………………………………………………………………….. ± 8dB at 100Hz

POWER AMPLIFER SECTION
Main IN, Speaker OUT

Continuous output power into 8Ω and 4Ω (Stereo):……………….. >50W (ref. rated THD, 20Hz-20kHz, both channels driven)

Rated THD (CCIF IMD, DIM 100):………………………………………… <0.009% (ref. 20Hz – 20kHz)
Clipping power:………………………………………………………………… >65W (ref. 1kHz 1% THD)

IHF dynamic power

8Ω:…………………………………………………………………………………. 100W
4Ω:…………………………………………………………………………………. 150W
2Ω:…………………………………………………………………………………. 200W
Peak output current:………………………………………………………….. >20A (ref. 1Ω, 1ms)
Signal/Noise ratio:…………………………………………………………….. >100dB (A-weighted, ref. 1W), >117dB (A-weighted, ref. 150W)
Damping factor:………………………………………………………………… >100 (ref. 8Ω, 50Hz and 1kHz)
Frequency response:…………………………………………………………. ± 0.1dB (ref. 20Hz – 20kHz), 3Hz – 70kHz (ref. -3dB)
Input impedance:……………………………………………………………… 20kΩ + 1nF
Input sensitivity:………………………………………………………………. 630mV (ref. rated power)
Voltage gain:…………………………………………………………………….. 29dB
Headphone output impedance:…………………………………………….. 68Ω

Channel separation:……………………………………………………………. 1kHz >80dB, 10kHz >70dB

Trigger Out

Output resistance:………………………………………………………………. <100Ω
Output current:…………………………………………………………………… 50mA
Output voltage:…………………………………………………………………… +12V

OVERALL SPECIFICATIONS
CD IN, Speaker OUT

THD (250mW to rated power, CCIF IMD, DIM 100):………………….. <0.009% (ref. 20Hz – 20kHz)
Signal/Noise ratio:………………………………………………………………. >94dB (A-weighted, ref. 1W), >110dB (A-weighted, ref. 50W, volume set for 2V input)
Frequency response:……………………………………………………………. ± 0.2dB (ref. 20Hz – 20kHz, Tone Defeat ON), 10Hz – 65kHz (ref. -3dB)
Channel separation:……………………………………………………………… 1kHz >80dB; 10kHz >70dB

Power Consumption

Rated power:……………………………………………………………………….290W (ref. 230V AC 50 Hz; 120V AC 60Hz)
Standby power:…………………………………………………………………… <1W
Idle power:…………………………………………………………………………. <35W

PHYSICAL SPECIFICATIONS

Dimensions (W x H x D):…………………………………………………………Net 435 x 100 x 286mm, Gross* 435 x 116 x 332mm
Net weight:…………………………………………………………………………. 15.21 lbs (6.9 kg)
Shipping weight:…………………………………………………………………… 20 lbs (9.1 kg)

 

 

 

U pripremi...