Naim – CD X2

Naim CDX 2
CIJENA:
38.790,00kn

CDX2 – A classic, redefined

Designed well, a product should have many years of useful life. The original Naim CDX debuted in 1999, and the revised CDX2 shares plenty of design DNA with its predecessor. Its radial arc disc tray is classic Naim. It’s different from the motorised assemblies used by other players, but better too, with superior isolation and resistance to resonance. In its latest incarnation, the CDX2 has incorporated some useful new enhancements, including a switchable digital output and extra low-noise clock regulation. After all, being able to do something well shouldn’t stop you from trying to do it better.

Features

Suspended transport with low-mass magnetic clamping mechanism to resist resonance

Anti-vibration resonance-controlled feet plus cast and extruded anti-magnetic chassis to further counter vibration

Fully double-regulated power supply with 20 low-noise, regulated voltages on the main circuit board, plus separate supplies on the servo control and display boards

User-selectable DIN and RCA analogue outputs, plus digital output (only functions when analogue outputs are disabled)

Technology & Craft

Integrity and stability of the signals read by the laser were prime design considerations for the CDX2′s development. A suspended transport and low mass magnetic clamping system ensure that the disc spins accurately and silently, unhindered by mechanical resonance.

The mass of the custom-made glass reinforced front-loading drawer mechanism has been carefully calculated to optimise rigidity and isolation. Additionally, the internal shielding has been improved bringing about further upgraded performance and lower noise. Paths between critical components are as short as possible to preserve delicate signals and each stage of the circuitry is powered by a separate regulated supply.

The CDX2 has a fully double-regulated power supply with 20 low-noise, regulated power supplies on the main circuit board, plus a separate supply on the servo control board and another on the display board. The CDX2 is easily upgradable via the XPS ultra low noise power supply to provide a substantial improvement in sound quality.

All main control functions are handled by a microprocessor running Naim-written software. Every aspect of the servo controller/decoder functionality is under software control: Naim-written codes allow maximised performance in all areas. For example, the transport parameters are optimised for each disc as it is loaded.

Audio Outputs

Analogue: DIN, RCA

Line Outputs Fixed (level): 2.1V RMS at 1kHz

Output Impedance: 10Ω (max.)

Load Impedance: 10kΩ (min.)

Frequency Response: 10Hz – 20kHz, +0.1/-0.5dB

THD + N: <0.1%, 10Hz -18kHz at full level

De-emphasis: ±0.1dB referred to main response

Digital Outputs (type): S/PDIF, 75Ω BNC

Connectivity

Remote Control: Infra Red (RC5)

Remote Input: 1 x rear panel 3.5mm jack (RC5 modulated/unmodulated)

RS232: Optional (DE9 female)

Formats

CD Formats: Red Book

Disc Compatability: CD, CD-R

User Control

Front Panel: Four button matrix

Handheld: Remote handset

Power

Supply Voltage: 100V, 115V, 230V; 50 or 60Hz

Power Supply Options: XPS, 555 PS

Upgrades

Power Supply: XPS, 555 PS

Other: DAC

Physical

Dimensions (HxWxD): 87 x 432 x 314 mm

Weight: 10.8 kg

Supplied with: NARCOM-4 Remote Control, Standard Interconnect, Mains Lead

Recenzija Naim CD X2 CD-Playera od strane “Audio Puls” online magazina

Recenzija Naim CD X2 CD-Playera od strane “Hi-Fi News” magazina

Recenzija Naim CD X2 CD-Playera od strane ” What Hi-Fi Sound and Vision” magazina

Recenzija Naim CD X2 CD-Playera od strane “Positive Feedback” magazina