Bryston – B60R

Bryston B60R
CIJENA:
29.530,00kn

The B60R is an integrated audio amplifier which has been built to not only equal, but surpass the parameters of the most demanding material available. It has been designed with pre-out/main in connectors in order to allow independent use of the preamplifier or stereo amplifier section within an audio or video system.

Inputs: 4x RCA single ended pairs (CD, tuner, video and aux), SPDIF (RCA)*
Outputs: RCA single ended (tape loop, pre-out/power In), speaker terminals, ¼” stereo headphone jack

PREAMPLIFIER FREQUENCY RESPONSE

20Hz – 20kHz +/- .05dB

MAXIMUM OUTPUT

15 volts

IM OR THD

Less than 0.005% at 3 volts out

HIGH LEVEL SENSITIVITY

500mV

RATED NOISE

Ref. 500mV

20-20kHz – 100dB

FEATURES

4 stereo RCA inputs

3 with DAC option

1 stereo RCA output

1 stereo tape loop

Headphone output

Gold plated switch

contacts and connectors

Optional remote, volume and mute

Optional MM phono stage

Optional DAC

AMPLIFIER WATTS

60 watts per channel, 8 ohms

100 watts per channel, 4 ohms

HARMONIC DISTORTION

Less than 0.01% from

20Hz to 20kHz at 60 watts

IM DISTORTION

Less than 0.01% from

10 milliwatts to 60 watts

NOISE

106dB below full output

SLEWING RATE

Greater than 60 volts per microsecond

POWER BANDWIDTH

.5Hz to over 100kHz

DAMPING FACTOR

Over 500 at 20Hz, ref. 8 ohms

INPUT SENSITIVITY

.775 Volt in for full output 50k input impedance

FEATURES

Each channel employs completely independent power supply

Will deliver full output to any phase angle at 4 ohms or higher

Pre-out/main-in connectors

DIMENSIONS

19 or 17 x 2.25 x 10.5 inches, 48.26 or 43.18 x 5.72 x 26.67 cm

wt: 19 lbs, 8.5 kg

FINISH

Available in 17 or 19 inch C-Series faceplates in

Silver or Black

 

U pripremi...